Commercial Slide Gate Operators
For all your commercial applications choose any of our models from the Eagle-2000 series, which features our state of the art Diamond control board. The most feature packed and installer friendly control board in the industry. Equipped with 20 feet of nickel plated chain and a no weld chain kit for easy installation, all models are backed by our best in class 5 year warranty. Gate capacity is 45 feet & 1000 lbs unless specified differently.
The Eagle-2000 comes with 6 models to choose from:
Eagle-2000-FSF
With this Fail Safe model you will be able to simply push the gate open when there’s a power outage for easy access during an emergency with no special tools required. The gate cannot be pushed open when power is applied.
Eagle-2000-FSC
The Fail Secure model allows you to open the gate with the use of a crank during a power outage when extra security is needed. This model cannot be manually pushed open.
Eagle-2000-1HP
This model uses dual 1/2 horsepower motors that work in tandem. It is built for gates up to 45 feet or 2000 pounds.
Eagle-2000-DM
The DM or Dual Motor model is equipped with dual 1/2 horsepower motors and is used for high traffic applications. One motor is used to open the gate, while the other is used to close.
Standard Features
- 2-Wire Master/Slave with Global Inputs
- Open/Close Delay
- One Pass (No Tailgate)
- Motor Brake
- 24 VDC Output for MAG Lock
- 24 VAC Auxiliary Power Output
- Partial Open
- Stop-Reverse
- Auto-Close Timer (1-60 sec.)
Compliance
- UL 325 and UL 991
- ETL Listed
Operating Classification
- Class I, II, III & IV
Warranty
- 5-Year Limited (Commercial)
- 7-Year Limited (When Used in Residential Application)
Mechanical
- Chain: #41 Nickel Plated (20′)
- Gear Reducer: Size 50
- Cover: All-Weather/UV Resistant (HDPE)
- Chassis: 1/4″ Zinc Plated Steel to Resist Corrosion
- Power Disconnect (1/2 HP)
- Auxiliary 120 VAC Power Outlet
Manual Release
- Fail-Safe (FSF): Push to open
- Fail-Secure (FSC): Use Crank to open
- Eagle 2000
- Eagle 2000-1HP
- Eagle 2000-DM
Power
- Eagle 2000- 1/2 HP Continuous Duty AC 115 VAC @ 60 HZ 5.7 AMP
- Eagle 2000 1HP – Dual 1/2 HP Continuous Duty AC 115 VAC @ 60 HZ 11.4 AMP
- Eagle 2000 DM – Dual 1/2 HP Continuous Duty AC Motor 1 to Open / Motor 2 to Close 115 VAC @ 60 HZ 5.7 AMP
Optional
- Power I Battery Backup (for 1/2 HP)
- Power II Battery Backup (for 1 HP) Provides up to 40-80 Cycles
Hardware
- No-Weld Chain Brackets
- UHMW Silent Idler Wheels
- Audio Alarm
- Pre-Wired Receiver Terminal
- Hand Crank (FSC Models Only)
Gate Capacity & Operation
- Maximum Gate for 2000-FSF, 2000-FSC, 2000-FR: 45 ft & 1000 lbs
- Maximum Gate for 2000-DM and 2000-1HP: 45 ft & 2000 lbs
- Maximum Gate for 2000-FR-1HP: 50 ft
& 2000 lbs - 12” per second travel
- Rated Continuous Duty
Dimensions
- 26″ (h) x 18″ (w) x 17″ (d)
Shipping Weight
- Eagle-2000-FSF: 125 lbs
- Eagle-2000-FSC: 125 lbs
- Eagle-2000-1HP: 150 lbs
- Eagle-2000-DM: 150 lbs
Installation Instructions
- Easy to follow instructions. Available in Spanish.
